From bursting & leaking pipes to blocked sewerage and moisture & mold, every situation can be the potential reason for water damage at your home. These situations give unpleasant and challenging experiences to homeowners. In most cases, they lead to considerable damage and loss to the building, furniture, or other valuable things, such as carpets & rugs, upholstery, electrical equipment, etc.
Though you can’t control these situations, you should still be prepared to handle them wisely. If you are ready to combat such situations, you can easily handle them without causing any harm to your things.
Carpets and rugs are essentials used to cover and protect the floor at your home. They also add value to your home’s interior design and overall aesthetic. They must be clean and in good condition, or else they will disturb the alluring beauty of your home.
Plumbing problems, moisture, and mold are some of the biggest threats to your carpets. When occur, they gradually weaken the fibers, fade the color and shine, and spoil the softness of the carpets’ surface.
If you want to keep your carpets safe from these types of problems, you must learn and follow some helpful tips and techniques.
In this piece of writing, we have explained some of the really helpful tips you can follow to protect your carpets from water damages. Check them out below!
Remove Water Quickly
First, try to prevent the water from entering your home. You can do that by making some necessary arrangements. But if the water enters your home, you need to be quick to remove that, or else the accumulated water will start damaging your carpets and rugs.
You can use a wet-dry vacuum or pump to remove the accumulated water from your home. Alongside, you need to find a temporary solution to the problem that caused accumulated water at your home. Later, you can contact your local plumbing expert to fix the problem permanently.
If your carpets and rugs dampen too much due to accumulated water, it would be best to contact a professional carpet cleaning Hartford company. They will dry your carpets out, clean them, and return you in their original condition.
Dry Your Carpets Out
It takes only 24 to 48 hours for mold to grow in a damp area. Did you know this fact? As per this fact, your carpets can develop mildew if they stay wet for more than 24 hours. Therefore, you need to be careful enough to keep your carpets safe.
You need to dry your carpets out as soon as possible after removing the water from your home. Use ceiling fans, heating dryers, and household fans; they will dry your carpet out quickly. Apart from this, you can use a dehumidifier (if you have one) or a vacuum that is designed to soak up water.
If the damped area on your carpet is too small, you can use a hairdryer or towel to soak up water. Just make sure no dirt and stains are left on the carpet.
While drying your carpet out, keep the carpet drying equipment pointed at the damp area. It will fasten the carpet drying process.
If you do not want yourself to be indulged in this bothersome carpet drying process, hiring a professional carpet cleaner will be the best choice for you.
Clean Your Carpets
The accumulated water usually brings dirt, dust, and germs with itself. It may make your carpets dirty. Therefore, you should not take any chance by just drying your carpets out after water damage. You need to clean and sanitize them properly, or else they can lead to health issues in your family.
Clean your carpets using a carpet cleaning solution and a steam cleaning tool. It will remove all dirt, grime, and wax out of your carpets. After that, sanitize them using an antibacterial sanitizer; it will remove and kill all germs, bacteria, and viruses from the carpets’ surface.
Remove the Moisture from Your Home
Before you place your carpets back on the floor, you need to ensure that your home is completely dried out, or else you will put your carpets at a higher risk of developing mold. You need to be careful about it.
Use ceiling fans, household fans, and heating dryers to remove the moisture from your home. For better results, improve your home’s ventilation system; it will definitely prevent moisture and mold from developing at your home.
Fix the Problems
Find out the root problems that cause water damages to your home. Once you get the problems, fix them as soon as possible, or else, they will create similar problems again at your home.
When you fix the problem, make sure it is a permanent solution and strong enough to prevent the water from entering your home.
Keep the Drinks and Other Liquid Away
The bootle you put on the edge of the table and the glass of a drink you hold on your hands can slip and fall anytime in a second. And if the carpets are on the floor, they may develop stains and moisture that are harmful.
You need to be careful enough for these types of situations. Try to keep your drinks and other liquids away from the carpets, or make sure you hold or put them safely. By doing so, you can keep your carpets safe to some extent.
Check If Any Part of Your Home or Accessories is Left Untreated
After cleaning, sanitizing, and drying your carpets out, if you think that your job is done, unfortunately, you are wrong. You might have known that mildew spreads. If it is left untreated at any part of your home, furniture, or accessories, it will develop again and spread across your home. And your carpet will again be at a higher risk of being damaged.
So, before you place your cleaned and disinfected carpets back on the floor, make sure that every corner of your home, furniture, and accessories are mildew-free.